Inside: How to clean a stainless steel sink in minutes with the best tricks for removing rust stains, tarnish; plus the best DIY cleaner for stainless steel; methods for managing scratches on the sink.
Nothing grosses me out more than a dirty sink. Okay, maybe that’s not true, but a dirty sink is pretty nasty and it can be the source of smells and unwanted critters in your kitchen if you let it get out of hand. Short of wiping the sink down a couple times a day after use, deep cleaning the sink about once every couple of weeks is a good idea and it takes only a few minutes! Here are my best tips for cleaning a stainless steel sink to make it sparkle like almost brand new.
How to mix your own sink cleaner
First things first, this is not necessarily a drain cleaner. If you have problem drains, you likely need to consult a plumber or do something beyond this particular solution. This DIY cleaner will get your sink sparkly clean looking though!And for sake of honesty, here is the grossest half of my double sink after two days of baking, dough cleaning, and spaghetti dinner. This is the half that sits beneath our dish drainer and it gets so dirty so fast. Yuck!
I have found the best way to start is with the drain stopper itself which takes the brunt of the grime. Here’s what you need:
- glass bowl to hold the sink stopper (I use a two-cup measuring cup)
- baking soda to just cover the sink stopper – about 1/3 cup
- white vinegar to just cover the sink stopper – about 1/3 cup
- a few squirts of liquid dish soap
Put all of that into your bowl in that order and let the bubbles do their magic. Let it sit for a couple of minutes to loosen all the dirt. While that’s happening, you’ll want to add about 1 Tablespoon of oxy bleach powder to your dry sink just to get that process going. I love oxy bleach and I clean 90% of my house with it. You can see all the different ways I use oxy bleach to clean around the house here.
Now go back to your sink stopper and scrub it vigorously with a scrub brush. You might even want to use a toothbrush for this part to get into the crevices and nooks and crannies.
How to clean the stainless steel sink
Okay, now that the sink stopper is clean, put it into your sink and start running HOT water. You’ve already got some oxy bleach powder in there, so it will start to dissolve. This is an incredible way to get rid of drain flies and fruit flies if you have them too . While it’s running, pour in the baking soda-vinegar-soap solution you have left over from cleaning the drain. It will only help boost the sink cleaning!
I always like to put a clean cleaning rag into this soapy mixture and let it sit for a good five to ten minutes. This way the rag is saturated with cleaning solution and I can use it to wipe down all sorts of kitchen surfaces. While this is sitting, I dampen the scrub brush and get into the corners and seams of the faucet and around the edges of the sink.
Then, once the rag has been sitting in the water for a while, I drain the sink and use the rag to wipe down EVERYTHING including what I can reach of the actual drain. If you look closely, you can see me in the shiny faucet LOL
But what about rust stains on a stainless steel sink?
Ah, yes. We have one of those. Our old dish drain split a bit and for about a week, there was rust showing up on our dishes and I couldn’t figure out why. Now there’s a tiny spot of rust on the side of the sink.
Good news is getting rid of rust stains on stainless steel isn’t that hard! It’s basically the same ingredients you use to clean the sink, but more concentrated and left on for a bit longer.
Here’s what I did. I made a baking soda-vinegar mixture and turned it into the consistency of paste; almost like an icing. I slapped it onto the rust stain and let it sit there for a good long time. My rust stain is small and not super dark and I left it for about 15 minutes.
If you have worse rust stains than mine, you will need to leave it on for longer and likely repeat this process. Once the 15 minutes was up, I used the scrub brush and some clean water to gently scrub the paste away and the rust went with it!
What if your stainless steel sink is scratched?
Mine is certainly not pristine and has some fairly large scratches from everyday use. I did some research and discovered that it is entirely possible to sand out the scratches on your stainless steel sink! I haven’t tried it yet, but plan to do it soon.
Deep clean your stainless steel sink in minutes with this DIY cleaner! PLUS hacks to remove stainless steel rust stains and scratches!
- Glass bowl or 2 cup measuring jar
- 1/3 cup Baking soda
- 1/3 cup White vinegar
- A few squirts of liquid dish soap
- 1 Tbsp Oxy bleach powder
- Stainless steel-safe liquid abrasive cleaning product
- Small bucket
- Scrub brush
- Old toothbrush
- Cleaning cloth
- Soft scouring pad
- Rubber sanding block
- 1000-600 Grit sandpaper
- Place sink stopper in glass bowl or measuring jar
- Add baking soda, vinegar, and liquid soap to your bowl in that order and let the bubbles work some magic. Allow it to sit for several minutes.
- While the stopper is soaking, add oxy bleach powder to your dry sink.
- Remove your stopper from the bowl and scrub it vigorously with a scrub brush. Use a toothbrush to clean all the small cracks.
- Put the stopper into your sink and start running HOT water.
- While the water is running, pour in the baking soda-vinegar-soap solution you have left over from soaking the stopper.
- Fill the sink 2/3 full, drop a clean cloth into the water, and let it sit for at least 10 minutes.
- Dampen the scrub brush and scrub the faucet and around the edges of the sink.
- Drain the sink and use the cloth to wipe down EVERYTHING, including what can be reached inside the drain.
- For rust stains: Make a concentrated baking soda-vinegar mixture in the consistency of icing or toothpaste. Apply it to the rust stain and let it sit for 15-30 minutes. Used the scrub brush and some clean water to gently scrub the paste away. Repeat if necessary.
- For minor scratches: Pour a bit of liquid abrasive cleaning product onto a soft scouring pad. Rub the scratch to blend it in with the surrounding sink area, using gentle pressure and adding more cleaner as necessary. Stop when you have achieved the desired results.
- For more severe scratches: Fill a bucket with warm water. Submerge a sanding block with 1000-grit sandpaper and allow the sandpaper to soak up the water. Using constant pressure, wet sand the scratches in the direction of the grain. Frequently rewet the sanding block and check the area. If the scratch persists, repeat with 600-grit sandpaper. When scratch has disappeared, buff with a liquid abrasive cleaning product and a soft scouring pad, then wash the sink down with warm water, liquid dish soap, and a clean sponge.
- How to clean feather down pillows
- Getting rid of pet hair in your house
- DIY Air Freshener to combat pet smells
- Great uses for Oxy Bleach around the house